上海沃通检测技术有限公司

1 机械设备

1.1 用于加工木材及类似材料或加工肉类及类似材料的圆锯(单刀片或多刀片)。
1.1.1 操作时刀具不移动的锯床，有固定床身、工件手工进给或可卸动力进给。
1.1.2 操作时刀具不移动的锯床，有手控的往复式锯台或锯座。
1.1.3 操作时刀具不移动的锯床，内设机械式工件进给装置，手工装卸工件。
1.1.4 操作时刀具可移动的锯床，有机械进给装置，手工装卸工件。
1.2 手工进料木工平面刨床。
1.3 木工用单面厚板刨床，加工时手工装卸工件。
1.4 用于加工木材及类似材料或加工肉类及类似材料、手动装料和/或卸料、具有固定式或移动式床身的带锯及具有可移动锯座的带锯。
1.5 1.1～1.4和1.7所述类型的，用于加工木材及类似材料的组合式机械设备。
1.6 手工进料多刀夹木工制榫机。
1.7 用于加工木材及类似材料的手工进料立轴造型机。
1.8 木工用手提链锯。
1.9 手工装卸的金属冷加工用压床(包括弯板机)。其可动工件的行程可达6mm以上，移动速度为30mm/s以上。
1.10 手工上下料的注塑或压塑塑模机。
1.11 手工上下料的注塑或压塑橡胶制模机。
1.12 以下各类用于地下工作的机械设备：
    ——轨道上运行的机械设备：机车及司闸车；
    ——液力传动的顶架；
    ——装在地下工作的机械设备上的内燃机。
1.13 装有压实机构的用人工装载方式收集家庭垃圾的卡车。
1.14 附录Ⅰ中3.4.7所述的带有万向节的防护罩及可卸式传动轴。
1.15 起重用的车辆。
1.16 存在从3m以上垂直高度跌落危险的载人升降设备。
1.17 制造烟火的机械设备。

2 安全零件
2.1 为了确保人员安全而特别设计的电敏感装置(非物质阻挡层、传感器层、电磁探测器等)。
2.2 确保双手控制器的安全功能的逻辑装置。
2.3 用于保护本附录1.9、1.10和1.11所述压床的自动可移式屏蔽网。
2.4 防倾覆装置(ROPS)。
2.5 物体跌落防护罩(FOPS)。

ANNEX IV

Categories of machinery to which one of the procedures referred to in Article 12(3) and (4) must be applied

1. Circular saws (single- or multi-blade) for working with wood and material with similar physical characteristics or

for working with meat and material with similar physical characteristics, of the following types:

1.1. sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece

or with a demountable power feed;

1.2. sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or

carriage;

1.3 sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces,

with manual loading and/or unloading;

1.4. sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual

loading and/or unloading.

2. Hand-fed surface planing machinery for woodworking.

3. Thicknessers for one-side dressing having a built-in mechanical feed device, with manual loading and/or unloading

for woodworking.

4. Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics

or for working with meat and material with similar physical characteristics, of the following types:

4.1. sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or support

for the workpiece;

4.2. sawing machinery with blade(s) assembled on a carriage with reciprocating motion.

5. Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material

with similar physical characteristics.

6. Hand-fed tenoning machinery with several tool holders for woodworking.

7. Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics.

8. Portable chainsaws for woodworking.

9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose

movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.

10. Injection or compression plastics-moulding machinery with manual loading or unloading.

11. Injection or compression rubber-moulding machinery with manual loading or unloading.

12. Machinery for underground working of the following types:

12.1. locomotives and brake-vans;

12.2. hydraulic-powered roof supports.

13. Manually loaded trucks for the collection of household refuse incorporating a compression mechanism.

14. Removable mechanical transmission devices including their guards.

15. Guards for removable mechanical transmission devices.

16. Vehicle servicing lifts.

17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of

more than three metres.

18. Portable cartridge-operated fixing and other impact machinery.

19. Protective devices designed to detect the presence of persons.

20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in

points 9, 10 and 11.

21. Logic units to ensure safety functions.

22. Roll-over protective structures (ROPS).

23. Falling-object protective structures (FOPS).

上海沃通国际认证中心在危险机械CE认证领域有超过10年的经验，任何疑问欢迎来电咨询，021-3159 3918.